CMDFLASH
23 Novembre 2010 V3.2.0.87

OBD:

Improved Renault EMS31x0 protocol

BOOT:
Bosch EDC17CP45 BMW BOOT TC1797 with new boot protection
Bosch EDC17C41 BMW BOOT TC1797 with new boot protection
WARNING:
Boot pin is not present on the top side of the ECU board.
This means that the you have to disassemble the ECU removing the board from the aluminium shell.
This is really dangerous.
Test the ECU on the car to be sure it's fully working after the opening and disassembly.
AFTER this test proceed with tuning.
Thermical conducting paste should be restored in order to avoid electronic components faults.
If not those faults may happens also after some days.

CMDFLASH
04 Nov 2010 V3.2.0.86

OBD:

Fiat 500 0.9L 62Kw Twinair CAN vr/write/checksum/recovery

BOOT:
Bosch MEVD17.2 BMW N55 x35i Single Turbo BOOT TC1797


CMDFLASH
11 Oct 2010 V3.2.0.85

BOOT TRICORE:

Bosch MED17.9.1 KIA BOOT TC1796
Bosch MEV17.2.2 MINI BOOT TC1767
Bosch MEVD17.2.2 PSA BOOT TC1797
Bosch MED17.1.1 VAG BOOT TC1796
Bosch EDC17C10 FORD BOOT TC1797

OBD:
Bosch ME7.1.1 VW Phaeton 6.0 W12 Ecu1 - Ecu2 r/w/chk/recovery

BOOT ST10:
Marelli 4AF FIAT Panda 1.2 ST10F269
Temic Mercedes Truck OM501LA III/12-00 BOOT C167 29F200

New timing optimizations for new fast computers ( i5 / i7 processors )
coming soon: 64 bit windows 7 support, at today only 32 bit is supported.

CMDFLASH
30 Aug 2010 V3.2.0.84

BOOT:

Bosch EDC17CP44 VAG BOOT TC1797
Bosch EDC17CP44 PORSCHE BOOT TC1797
Bosch MEVD17.2.2 MINI BOOT TC1797

Marelli 5MS MV AGUSTA ST10F280

CMDFLASH
19 Jul 2010 V3.2.0.83

OBD2:

Siemens MSx8x supports the new antituning software updates

BOOT:
Bosch EDC17C46 VAG BOOT TC1767
Bosch MEV17.46 BMW BOOT TC1796


CMDFLASH
16 Jun 2010 V3.2.0.82

OBD2:

Bosch ME7.8.4 Porsche 997 GT3 EU r/w/chk/recovery
Bosch ME7.8.4 Porsche 997 GT3 USA con RSA r/w/chk/recovery
Bosch ME7.8.2 Porsche 997T protocols now support GT2 versions too

Bosch MED17 VAG BOOT MY2010 version
Bosch EDC17 VOLVO BOOT MY2010 version

Bosch EDC16C39 Fiat Doblo 1.6 Mj MY2010
Marelli Multiair protocol updated with new multiair recoding

CMDFLASH
10 May 2010 V3.2.0.81

OBD2:

Siemens Continental EMS3130 Renault Megane RS, checksum updated

CMDFLASH
3 May 2010 V3.2.0.80

OBD2:
Siemens MSS60/MSS65 Protocol now allows to flash back original file on ECUs with new protected software updates
Siemens Continental EMS3130 Renault Megane 2.0T 250Hp CAN r/w/chk/recovery
Marelli Multiair Alfa Romeo MiTo 1.4 CAN r/w/chk/recovery
Denso Jaguar XF/XK/XJ 5.0i V8 283Kw / 357Kw Supercharged CAN r/w/chk/recovery
Siemens Simos 6.2 VAG CAN r/w/chk/recovery

CMDFLASH
6 April 2010 V3.2.0.79

OBD2:
Bosch ME7.8.2 Porsche 997T EU r/w/chk/recovery ( 5 min read / 75 sec write )
Bosch ME7.8.2 Porsche 997T USA with RSA r/w/chk/recovery ( 9 min read / 9 min write )
Siemens SID203 Land Rover Discovery 4 2.7 TDV6 140Kw MY2010 CAN r/w/chk/recovery


CMDFLASH
18 Mar 2010 V3.2.0.78

OBD2:
Siemens SDI3 Porsche Cayman S 3.4 235Kw CAN r/w/chk/recovery
Siemens SDI3 Porsche 997 3.8 Carrera S 283Kw CAN r/w/chk/recovery
Siemens SDI3 Porsche 997 3.8 Turbo 368Kw CAN r/w/chk/recovery
Bosch EDC16C39 Chevrolet Cruze 2.0D CAN r/w/chk/recovery

BDM:
Bosch EDC7U1 MACK r/w/checksum ( added to plugin EDC7+UC31 CMD10.3.7)

BOOT-MODE:

Temic Mercedes OM501LA/II C167 29F200 r/w/checksum ( added to plugin ST10 BOOT-MODE CMD10.3.14)
Bosch ME7.9.71 Chery A3 1.6MT ST10F275 r/w/checksum


CMDFLASH
24 Feb 2010 V3.2.0.77

OBD2:
Siemens SID203 Land Rover 3.6 TDV8 MY2010 CAN r/w/chk/recovery
Siemens SDI4 Porsche Cayenne 4.8 turbo and naturally aspirated CAN r/w/chk/recovery

BOOT-MODE ST10:

Bosch ME7.9.7 LADA 1118 1.6i ST10F275 r/w/checksum
Bosch ME7.9.5 PSA new checksum for MY 2010 models


CMDFLASH
10 Feb 2010 V3.2.0.76

BOOT MEDC17 IROM/XROM protected processor:
Fixed "wrong ECU" issue that sometime happens on ECUs with TC1766 micro
SEA-DOO RXT watercraft Bosch ME17.8.5 r/w/chk
Renault Bosch EDC17CP19 r/w/chk
CITROEN EDC17CP11 r/w/chk

OBD2:
DELPHI MT20U2 Great Wall Hover / Steed 2.4 r/w/chk/recovery
New checksum for MY 2010 Bosch ME7.6.2

BOOT-MODE ST10:
New cheksums for ST10F275 Bosch ME7.9.x

Automated import / export for CMDFlash slave files. On Microsoft IIS Platforms it's now possible to automate the packing/unpacking of slave's files.
To obtain the development kit please contact This email address is being protected from spambots. You need JavaScript enabled to view it., service is free of charge. Requirements: Public Fixed IP Address for the server and valid subscriptions for slaves and master tools.

 

 

facebook group icon res